Shopping Cart

0 Item(s) - $0.00

Rust-Oleum Multi-Purpose Pressure Wash Concentrate - For Multipurpose, Multi Surface - Concentrate - Liquid - 128 fl oz (4 quart) - 12.5 to 13.5 pH - Recommended For: Grease Remover, Grime Remover, Mold Remover, Oil Remover, Fungi Remover, Algae Remover, Stain Remover, Mildew Remover - Fast Acting, Bleach-free, Scrub-free, Anti-corrosive - Purple - 1 Each

SKU: RST352251

Description
  • Industrial Strength Formula Removes Oil, Grease, Grime, Mold & Mildew Stains And More
  • For Use On Concrete, Brick, Asphalt, Masonry, Stucco And More
  • No Scrubbing Needed

0 Available


Specifications
General Information
Manufacturer Rust-Oleum Corporation
Manufacturer Part Number 352251
Manufacturer Website Address http://www.rustoleum.com
Brand Name Rust-Oleum
Product Line Professional
Product Name Multi-Purpose Pressure Wash Concentrate
Packaged Quantity 1 Each
Product Type Multipurpose Cleaner
Product Information
Cleaner Type Concentrate
Cleaner Form Liquid
Cleaner Volume 128 fl oz (4 quart)
Composition
  • Detergents
  • Foaming Surfactants
  • Dye
pH 12.5 - 13.5
Recommended Use
  • Grease Remover
  • Grime Remover
  • Mold Remover
  • Oil Remover
  • Fungi Remover
  • Algae Remover
  • Stain Remover
  • Mildew Remover
Directions/Instructions

DIRECTIONS - MANUAL APPLICATION

Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.

1. Rinse surface with water.

2. Dilute concentrate 1:19 in a pump-up sprayer (approximately 7 oz. of concentrate with 1 gallon of water).

3. Working in small sections, apply solution to surface with a soft bristle brush or pump-up sprayer.

4. Wait 3-5 minutes. Do not allow solution to dry on surface.

5. With hose at highest pressure, rinse surface with water.

6. Move to new section and repeat steps 1-5.

DIRECTIONS - PRESSURE WASHER APPLICATION

Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.

1. Rinse surface with water.

2. Place detergent application siphon tube and screen filter directly into solution. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour concentrate (full strength) directly into pressure washer.

3. Working in small sections, apply solution to surface using low pressure spray nozzle. For vertical surfaces, apply bottom to the top.

4. Wait 3-5 minutes. Do not allow solution to dry on surface.

5. Remove siphon tube from solution and rinse surface from top to bottom with high pressure.

6. Move to new section and repeat steps 1-5.

7. Before storage, rinse pressure washer parts thoroughly with water.

Application/Usage
  • Multipurpose
  • Multi Surface
Features
  • Fast Acting
  • Bleach-free
  • Scrub-free
  • Anti-corrosive
Physical Characteristics
Color Family Purple
Product Color Purple
Miscellaneous
Recycled No
Post-consumer-waste% 0%
Assembly Required No
Country of Origin United States
Reviews

Total Customer Reviews1

  • Overall Score:
  • (5.0 / 5)

Narrow reviews by:


Mike

My favorite pen

06/28/2018

  • Rating:
  • (5.0 / 5)

Mike

My favorite pen

06/28/2018

  • Rating:
  • (5.0 / 5)