Vectra® ProX Floor Finish saves time while giving floors diamond-like brilliance, clarity and durability.
Packaged Quantity
1 Each
Product Type
Floor Finish
Product Information
Cleaner Type
Ready-To-Use
Cleaner Form
Liquid
Cleaner Volume
640 fl oz (20 quart)
Scent
Ammonia
pH
8.6
Contact Time
30 Minute
Recommended Use
Dirt Remover
Scratch Remover
Black Mark Remover
Scuff Mark Remover
Directions/Instructions
Blockade areas to be stripped or finished. Position wet-floor signs around area to be cleaned.
Strip floor using recommended Diversey brand stripper according to label directions
Coating
Apply 2-3 uniform coats using a clean finish mop or the TrailBlazerTM/MC Floor Finish Applicator System. Apply additional coats until desired gloss is obtained.
Allow 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Allow finish to cure for 24 hours before buffing.
Maintenance
Dust mop or sweep
Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner following label directions
If desired, spray buff using recommended Diversey brand floor maintainer to enhance gloss
Recoating
Dust mop or sweep
Deep scrub floor using Diversey cleaner according to label directions
Blockade area and apply 1-2 uniform coats of finish using a clean finish mop or the Diversey TrailBlazerTM/MC Floor Finish Applicator System. Allow finish to cure for 24 hours before buffing.
Removal
Remove using recommended Diversey brand stripper according to label directions
Best Results
Do not dilute
Do not use on surfaces colder than 50°F (10°C) @ 15% RH
To avoid contamination, do not return unused product to original container
Note: Floors will be slippery when wet or contaminated with foreign materials. Promptly clean-up spills and foreign materials. Meets ASTM D2047 requirements for slip resistance.
