Extreme Floor Stripper is fast-acting, low-odor and extremely powerful. With an 11.8 to 12.8 pH, this rinse-free, concentrated formula with a lemon fragrance has a lower pH than competitive formulas and requires no neutralization or rinsing. High-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish from a variety of floors with a minimum amount of labor. Using the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic and urethane fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. It is not recommended on linoleum or sheet vinyl floors.
Extreme Floor Stripper is fast-acting, low-odor and extremely powerful. With an 11.8 to 12.8 pH, this rinse-free, concentrated formula with a lemon fragrance has a lower pH than competitive formulas and requires no neutralization or rinsing. High-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish from a variety of floors with a minimum amount of labor. Using the latest in technology, this powerful professional stripper unlocks the chemical bonds of acrylic and urethane fortified floor finishes releasing them from the floor surface and is suitable for use on most surfaces. It is not recommended on linoleum or sheet vinyl floors.
Packaged Quantity
1 Each
Product Type
Floor Stripper
Product Information
Cleaner Type
Concentrate
Cleaner Form
Liquid
Cleaner Volume
640 fl oz (20 quart)
Scent
Lemon
Composition
Water
Butoxyethanol
Ethanolamine
Sodium Xylene Sulfonate
Benzyl Alcohol
C9-11 Alcohols Ethoxylated
Tetrasodium EDTA
D-Limonene
Fragrance
2,6-Dimethyl-7-Octen-2-Ol
Partially Fluorinated Alcohol Surfactant
Colorant
pH
11.8 - 12.8
Directions/Instructions
Recommended for removing multiple coats of water-based acrylic and urethane fortified floor finishes from all types of resilient tile and hard surfaces. Not Recommended on linoleum or sheet vinyl floors. Pre-test in a small area; bleeding or discoloration may our on linoleum, rubber tile, or asphalt tile. Sweep or dust mop floors or to remove any large debris.
For light to medium strip, dilute 10 oz. /gal. (1:12).
For heavy striping, dilute 25 oz. /gal. (1:5) with cold water.
Apply solution liberally to floor surface. Allow 3-5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low speed rotary machine, automatic scrubber or stripping machine. Pick up solution with a wet vacuum, automatic scrubber or mop and bucket and thoroughly rinse the floor. Allow floors or to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue.
